Bruno
Vertical Platform Lift (VPL-3100) A simple, safe, and dependable product, with an array of standard features, but still in an attractive price range for virtually any consumer. The Bruno name has always meant trust, and our new Vertical Platform Lift extends that promise to another category of solutions for your independence.

Model BC - Acme screw drive
Model HBC - Hydraulic drive The BC and HBC models are manufactured as an unenclosed lift. This unit is often installed within a vertical runway enclosure built by others. In some commercial settings, where the travel distance is less than 5 feet, a BC or HBC may be installed unenclosed. Because of its versatility, this model can overcome architectural barriers in a variety of different settings. Common applications include: churches, libraries, restaurants, and schools. Each vertical platform lift is designed to be able to conform to the requirements in ANSI A18.1 when properly equipped and installed. Check with local authorities for code regulations

Model CDE - Acme screw drive
Model HCDE - Hydraulic drive CDE/HCDE models are manufactured with a steel runway enclosure to eliminate the need for a separate enclosure to be built on site. Astructural steel framework is used on indoor enclosures, while an aluminum framework is used on outdoor units to minimize corrosion.
Runway enclosures can be extended and roofs added to protect the user from inclement weather. In such cases, optional lighting and a ventilation system may be required.

Model PCDE - Acme screw drive
Model HPCDE - Hydraulic drive The PCDE and HPCDE models come equipped with a factory supplied enclosure with either clear or tinted acrylic panels. These attractive models allow light into the runway and permit the user to see outside the unit during operation.

Model WOV 355
The WOV355 is a vertical platform lift that looks like an elevator. This model has a 1:2 roped hydraulic drive and full height interior platform walls. A suspended style ceiling with florescent lighting is also provided to complete the enclosure. Similar to our other vertical models, the control panel buttons on the WOV 355 require constant pressure for the lift to raise and lower.

Model RE - Acme screw drive
The RE model unit is designed with the homeowner in mind. This lift is similar to the BC model; however, the platform side guards and gates are only 36” tall, thus making the unit “for residential use only”. Model BC Portable Vertical Platform Lift The RE model is an affordable alternative to lengthy, costly, and unsightly ramps. The lifting heights of 24”, 42”, 60”, and 72” will satisfy most applications. For heights greater than 72”, a BC model may be used.

Model BC Portable Vertical Platform Lift
The portable vertical platform lift can be an ideal solution for access to a stage or platform. Since the unit is equipped with wheels, it can be moved when access to the stage is not necessary, and the room needs to be used for other functions. In some cases, a variance may be required.P>

PL-TG Toe-Guard
PL-ENC Enclosure
PL-EZE Enclosure
PL-P Portable
PL-RA Residential
PL-S Standard
Carrier-Lift

Handilift
IPL RE
IPL S
PAL

Handy Lift
Personal Platform Lift - A personal platform lift to assist the physically challenged into a recreational vehicle. Lifts up to 30 inches at a safe speed to door entry height. Powder coated, rust resistant finish. Night lights. Emergency manual crank included.